The player base for Escape From Tarkov is still at peak levels. So, we’ve updated our Escape From Tarkov Best Settings guide for the latest patch, and beyond that, I’ll include general and graphics settings you must use.
I’ve tested Escape from Tarkov on the following PC specifications:
- CPU: Core-i5 12400f
- GPU: RTX 4070
- RAM: 16GB DDR4
- Storage: 2.5TB SSD
- Operating System: Windows 10
To run Tarkov, you should have at least an Intel i3 or AMD Athlon CPU, a DX9 compatible GPU with 1 GB VRAM, and 8 GB RAM.
The following settings can impact your FPS the most in EFT:
- Shadows Quality & Visibility
- Resampling
- Screen Space Reflections (SSR)
- Grass Shadows
- Object Level of Detail
Escape from Tarkov optimization is okay at best. I’ve experienced a lot of stuttering and freezing in-game, with even abrupt crashing while I was queuing for a session. As far as performance is concerned, I get over 100 FPS on 1440p resolution, max settings, and DLSS set to quality. While the game has issues with stability, it nails the performance part. Our EFT reviewer Daniyal also had a similar experience with the game.
Best Tarkov Graphics Settings
Tarkov’s Graphics Settings are what I’ve seen a lot of people struggle with. I’ll explain each setting in short detail. This will allow you to understand each setting clearly and help you fine-tune them later.Quick Overview Of Graphics Settings
Screen Resolution | Highest Possible |
Screen Mode | Fullscreen |
VSync | Enabled |
Aspect Ratio | Player’s Choice |
Overall Graphics Quality | Custom |
Texture Quality | High |
Shadows Quality | Low |
Object LOD Quality | 2 |
Overall Visibility | 1000 |
Shadow Visibility | 40 |
Antialiasing | TAA High |
Resampling | 1x |
HBAO | Off |
SSR | Off |
Anisotropic Filtering | Off |
Nvidia Reflex Low Latency | On+ Boost |
Sharpness | Player’s Choice |
Lobby FPS Limit | 30 / 60 |
Game FPS Limit | 0 / Highest Possible |
Grass Shadows | Off |
Noise | Off |
Chrom Aberrations | Off |
Z-Blur | Off |
Use Only the physical Cores | Enabled |
FOV | Personal Preference |
Here are the most impactful graphics settings compared:
Similar Read: Best COD Vanguard Settings
Nvidia Settings For Escape From Tarkov
Let’s check out a brief roundup of the options you should pick while tweaking the Nvidia Settings.Summary Of Nvidia Settings
Anisotropic Filtering | Application Controlled |
Disable Antialiasing | FXAA |
Enable Antialiasing | Gamma Correction |
Antialiasing Mode | Application Controlled |
Antialiasing Transparency | Disabled |
CUDA GPU | All |
Low Latency Mode | Off |
Max Frame Rate | Off |
Monitor Technology | G-Sync |
Multi-Frame Sampled AA (MFAA) | Off |
OpenGL Rendering GPU | Auto Select |
Power Management Mode | Prefer Maximum Performance |
Preferred Refresh Rate | Highest Possible |
Shader Cache | On |
Texture Filtering – Anisotropic Sample Optimization | Off |
Texture Filtering – Negative LOD Bias | Allow |
Texture Filtering Quality | High Performance |
Texture Filtering – Trilinear Optimization | On |
Threaded Optimization | Off |
Triple Buffering | Off |
Vertical Sync | Off |
Virtual Reality Pre-Rendered Frames | 1 |
After you successfully make the changes, close the Nvidia Control Panel, and that’s it. All settings are applied, so you need to boot up the game and see the performance improvement.
Escape From Tarkov AMD Settings
If you’re using an AMD GPU, you’ll need to fine-tune the best Tarkov settings in Radeon Software. These settings aim to give you a noticeable boost in performance and increase game stability. So, using these settings is as important as ever.AMD Settings Summarized
Radeon Anti-Lag | Enabled |
AMD Radeon Chill | Disabled |
Radeon Boost | Disabled |
Image Sharpening | DIsabled |
Radeon Enhanced Sync | Disabled |
Wait for Vertical Refresh | Always Off |
Antialiasing | Use Application Settings |
Antialiasing Method | Multisampling |
Morphological Antialiasing | Disabled |
Anisotropic Filtering | Disabled |
Texture Filtering Quality | Standard |
Surface Format Optimization | Enabled |
Tessellation Mode | Override Application Settings |
Maximum Tessellation Level | Off |
OpenGL Triple Buffering | Disabled |
Reset Shader Cache | Perform Reset |
You’ve successfully used the best Tarkov settings in AMD Radeon Panel. It’ll hopefully give you a noticeable boost in performance. If you choose to do a Shader Reset, then I suggest performing a system reboot before launching Tarkov.
High FPS Optimization For Escape From Tarkov
This section of the Escape From Tarkov, Best Settings guide, will focus on different Windows optimizations and tweaks you can do to improve performance.- Update Windows 10 To The Latest Version
- Enable Game Mode In Windows Gaming Settings
- Enable Ultimate Performance Power Plan
- Clean Up Temp Folder And Other Cache Files
- Eliminate Unnecessary Background Applications
- Disable Hardware Acceleration For Apps
Wrapping Up Tarkov Optimization Guide
Running Escape From Tarkov has been troublesome for me in the beginning, despite having good hardware. The problem was the game’s optimization and tons of bugs that ruined the experience.
Even though the game is still in a closed beta state, the optimization has gotten way better. From playing on a measly 60-65 FPS, it has now been bumped up to 100+ FPS. They’ve resolved several texture-steaming issues and game-breaking glitches over time that have helped me enjoy the game a little better.
So, hopefully, my settings guide was able to give you even more performance out of the game than you currently were getting. The game is only going to get better with time so you can always bump up a few settings to get better visuals in Tarkov.
Thanks! Do share your feedback with us. ⚡
How can we make this post better? Your help would be appreciated. ✍
#1
Amazing guide! Holy moly