Best Escape From Tarkov Settings [Tried & Tested]

The player base for Escape From Tarkov is still at peak levels. So, we’ve updated our Escape From Tarkov Best Settings guide for the latest patch, and beyond that’ll include general and graphics settings you must use. 

Escape From Tarkov System Requirements

Before we start applying different optimizations in Escape from Tarkov, confirm if your PC is capable of handling it first. Since Escape from Tarkov isn’t generally a properly optimized game, you’ll need a decently specced system for a proper gaming experience.

Minimum System Requirements

Best Tarkov Graphics Settings

Here’s a quick preview of how your Escape From Tarkov Best Settings should look like:

Screen Resolution	Highest Possible
Screen Mode	Fullscreen
VSync	Enabled
Aspect Ratio	Player’s Choice
Overall Graphics Quality	Custom
Texture Quality	High
Shadows Quality	Low
Object LOD Quality	2
Overall Visibility	1000
Shadow Visibility	40
Antialiasing	TAA High
Resampling	1x
HBAO	Off
SSR	Off
Anisotropic Filtering	Off
Nvidia Reflex Low Latency	On+ Boost
Sharpness	Player’s Choice
Lobby FPS Limit	30 / 60
Game FPS Limit	0 / Highest Possible
Grass Shadows	Off
Noise	Off
Chrom Aberrations	Off
Z-Blur	Off
Use Only the physical Cores	Enabled
FOV	Personal Preference

Tarkov’s Graphics Settings are what I’ve seen a lot of people struggle with. I’ll explain each setting in short detail. This will allow you to understand each setting clearly and help you fine-tune them later.

After trying a lot of setting combinations on different systems, the following settings offer a good mix of visuals and performance. After accessing the Graphics Tab in-game, you can apply the following settings for best performance.

1. Screen Resolution: Select the Highest Available For the Best Visuals. If you want to get High Frames, you can lower it down to 1600 or 1440.
2. Screen Mode: Go For Full Screen
3. VSync: Enable, this will actually unlock your FPS instead of locking them at your display’s resolution. Pair it with disabling Vsync in your GPU settings (more on that later).
4. Aspect Ratio: Personel Preference. Most displays have a 16:9 aspect ratio.
5. Overall Graphics Quality: Custom since we’ll tweak each setting below
6. Texture Quality: High, because there is no performance difference if you select Low or Medium.
7. Shadows Quality: Low since Shadows in Tarkov are taxing on FPS.
8. Object LOD Quality: 2 is the most balanced choice here between quality and performance.
9. Overall visibility: 1000
10. Shadow Visibility: 40
11. Antialiasing: Although FXAA will help you smoothen the textures quite a lot, turning it off will make textures super sharp. I found that TAA High is the best balance between graphics and Performance.
12. Resampling: 1x off. If you have a good PC, you can turn it up a little bit.
13. HBAO: Off
14. SSR: Off since reflections in Tarkov are extremely taxing on FPS. Unless you have a high-end PC or after the game gets further optimized, best to keep it off.
15. Anisotropic Filtering: per texture as it improves visuals with little to no reduction in FPS.
16. Nvidia Reflex Low-Latency: On + Boost since it’s a great feature that helps make the game snappier and more responsive. 
17. Sharpness: Personel Preference, but note that way too high Sharpness has an impact on Performance.
18. Lobby FPS Limit: 30 or 60, makes no difference.
19. Game FPS Limit: Set it to 0 or Highest Available Value.
20. Grass Shadows: Turned Off
21. Noise: Off
22. Chrom Aberrations: Off
23. Z-Blur: OffAfterward, head over to Game Settings and only enable “Use Only the Physical Cores.”

Here, select whatever FOV you want, but just note that a Higher FOV will give you a Low FPS. That is because a higher field of view loads more in-game objects and scenery on your display. More stuff loading on your screen at a single instance will put a load on your GPU reducing FPS.

Similar Read: Best COD Vanguard Settings

Nvidia Settings For Escape From Tarkov

Let’s check out a brief roundup of the options you should pick while tweaking the Nvidia Settings.

Anisotropic Filtering	Application Controlled
Disable Antialiasing	FXAA
Enable Antialiasing	Gamma Correction
Antialiasing Mode	Application Controlled
Antialiasing Transparency	Disabled
CUDA GPU	All
Low Latency Mode	Off
Max Frame Rate	Off
Monitor Technology	G-Sync
Multi-Frame Sampled AA (MFAA)	Off
OpenGL Rendering GPU	Auto Select
Power Management Mode	Prefer Maximum Performance
Preferred Refresh Rate	Highest Possible
Shader Cache	On
Texture Filtering – Anisotropic Sample Optimization	Off
Texture Filtering – Negative LOD Bias	Allow
Texture Filtering Quality	High Performance
Texture Filtering – Trilinear Optimization	On
Threaded Optimization	Off
Triple Buffering	Off
Vertical Sync	Off
Virtual Reality Pre-Rendered Frames	1

After you successfully make the changes, close the Nvidia Control Panel, and that’s it. All settings are applied, so all you need to boot up the game and see the performance improvement. Or you can continue reading this best Tarkov settings guide for more tips on how to boost performance. 

Escape From Tarkov AMD Settings

If you’re using an AMD GPU, you’ll need to fine-tune the best Tarkov settings in Radeon Software. These settings aim to give you a noticeable boost in performance and increase game stability. So, using these settings is as important as ever.

Radeon Anti-Lag	Enabled
AMD Radeon Chill	Disabled
Radeon Boost	Disabled
Image Sharpening	DIsabled
Radeon Enhanced Sync	Disabled
Wait for Vertical Refresh	Always Off
Antialiasing	Use Application Settings
Antialiasing Method	Multisampling
Morphological Antialiasing	Disabled
Anisotropic Filtering	Disabled
Texture Filtering Quality	Standard
Surface Format Optimization	Enabled
Tessellation Mode	Override Application Settings
Maximum Tessellation Level	Off
OpenGL Triple Buffering	Disabled
Reset Shader Cache	Perform Reset

You’ve successfully used the best Tarkov settings in AMD Radeon Panel. It’ll hopefully give you a noticeable boost in performance. If you choose to do a Shader Reset, then I suggest performing a system reboot before launching Tarkov. 

High FPS Optimization For Escape From Tarkov

This section of the Escape From Tarkov, Best Settings guide, will focus on different optimizations and tweaks you can do in Windows to improve performance.

It seems you like FPS games. Why not check our Best Valorant Settings guide next?

Update Windows 10 To The Latest Version

Updating your Windows to the latest version is an essential part of this guide. Not only will you get the latest features, but you will also enjoy the full potential of your hardware.

Additionally, each Windows 10 Update provides better support for hardware, thus giving you better performance. Folks at Microsoft are always looking for ways to improve the operating system.

1. Open Search > Type Check For Updates.
2. Afterwards, click on Check for Updates and if new updates are available. You can download them and later install them. I’ve some updates left to be installed, and you can see there are updates of all sorts, that are very vital.

Enable Game Mode

Game Mode is a feature within Windows 10, that is aimed to provide 100% performance for Gamers. The way it operates is quite simple. All it does is that it changes the priority of the game from low to high. On top of that, it also closes down all the unnecessary applications from the background.  These Applications squeeze a percentage of power from your hardware and cause instability while playing Escape From Tarkov.

1. Open Start > Search Game Mode.
2. Drag to Enable Game Mode and you are all set.

Remove Focus Assist

How many times have you noticed that while you are in the middle of loot or fight, there is a Game Notification at the bottom of the screen asking you if the recording has begun or a screenshot has been taken?

Well, these settings are part of the Game Bar, and they are these fancy features that you do not need. Screen Recording or Screenshots are automatically taken because of some of the keybinds that you never set. In addition to disturbance, the notifications also have a negative impact on your performance because they pile up in the Task Center.

1. Open Search  > Type and Click Game Bar Setting.
2. Disable Everything In-Game Bar and Captures Tab. Do not go on to disable Game Mode, pay attention.
3. Go To Start Once Again and Search for Focus Assist.
4. You can completely turn it off, which is what I recommend. However, if you work from home and want to keep up with notifications and emails. You can set specific times, or work with when I’m playing a game setting.

Enable Ultimate Performance

While playing Escape From Tarkov, you always want 100% from your Hardware, right? Well, this feature will do exactly as we are thinking right now. The Ultimate Performance plan removes all the power thresholds and allows your PC to work at Maximum Speeds.

This can significantly improve FPS in Escape From Tarkov. On top of that, it’ll take the speed of your Windows 10 to the next level. The feature is not available by default, so you have to go through some beginner-level prompt coding and enable it.

1. Open Start > Search For Command Prompt > Open it with Administrator Privileges.
2. In Command Prompt, Copy and Paste the code given below.

   

   If you pasted the code correctly, it’ll give you an indication mentioning Ultimate Performance.

powercfg -duplicatescheme e9a42b02 -d5df -448d -aa00 -03f14749eb61

Sometimes, there is an invalid perimeter error in Command Prompt, but don’t worry we have an alternative.

1. Open Search Again > Type “Windows PowerShell”.
2. Paste The Same Code in Windows PowerShell.

Clean Up Your Escape From Tarkov Disk

In order to get high fps and stable performance. We must ensure that there are no temp, virus-infected, or trash files in our SSD/Harddrive. These files can impact your performance, and they also occupy useless space. Also, make sure your Escape From Tarkov is installed in your SSD.

1. Open Start > Type Run.
2. Under Run, Write down “%temp%” without quotations and click ok.
3. Now Click on Control + A on your keyboard > right click any file > delete.

After this step, we will now move on to Disk Cleanup which is as important as this one. Doing these steps will clean our drives from corrupt and waste files that aren’t any good.

1. Open My Computer > Right Click The Drive where Escape From Tarkov Is Installed.
2. Afterwards, Click on Disk Cleanup and You will have several things to clean up. Make sure you are reading each tab, by clicking on their warnings. For example, here is the Downloads Tab that has 23.5GB worth of data. I won’t clean this up, because there are important files and they might be deleted. Your focus should be on cleaning all the leftover files that are like reports, crashes, and debugs.

Set High Graphics Priority For Escape From Tarkov

Through Game Mode, you can actually ensure that the Priority for the game is high. Therefore, the game can squeeze more performance out of the CPU. In the same vein, there is a Graphics Setting in Windows 10 that is kind of aimed at gamers.

Through Graphics Profile, you can set high graphics priority for that game. Afterward, the graphics card is also set on high priority and can give its 100% output to the game.

1. Open Start > Type Graphics Settings.
2. Now Click on Browse and Find wherever your Escape From Tarkov Is Installed. .
3. After clicking on the application, you will get the option to choose the application’s graphics preference. Select High Performance and click on Save.

Background Application and Services

We can further Optimize Escape From Tarkov by disabling unnecessary Applications and Services.

While playing any game, you should make sure that the game application is taking full use of the CPU, Memory, and Graphics Card. Subsequently, if there are any unnecessary applications or services taking a margin of power. This would create instability and you will never get consistent performances.

In this method, we’ll ensure that all these unnecessary applications and services are disabled. Just to clarify, these applications and services start alongside your PC. Therefore, you never notice them.

1. Open Search > Type Run > Under Run, write MSConfig, and click ok.
2. In Services Tab, checkmark “Hide All Microsoft Services”, because we don’t want to disable the important ones.
3. Now go through each of them and disable the ones you feel are irrelevant and from third-party applications.
4. Once done, head over to the startup tab. Under Startup, disable all the applications with High and Medium Priority.

Now that we are done, you shouldn’t worry about any application or service running in the background while playing Escape From Tarkov. Further, the bonus feature of these changes is that it’ll also improve your Windows 10 Speed and Increase boot times significantly.

Enhance Default Animations

Once again, we can further Optimize Escape From Trakov by disabling these unnecessary Animations that have a negative impact on our PC.

These animations are enabled by default and feature some eye-catching visuals that are unnecessary. In order to get a higher FPS in Escape From Tarkov. Settings like these have to be disabled, so we can be confident that no extra feature is having an impact on our performance

1. Head over to start > Type Advanced System Settings.
2. Now Click on Settings Under Performance Tab > Visuals. Under Visuals, Select Custom, and only enable the ones like the picture.
3. Don’t forget to hit Apply and click on OK after you make changes.

Hardware Acceleration

Hardware Acceleration is another feature that is enabled within most Applications. The feature allows the Application to operate more efficiently by unloading its resources in a different manner.

Likewise, this sort of behavior requires Power to Operate. As a result of this, a percentage of our hardware is always being used and can cause serious performance issues in any game.

1. Open Discord > Settings > Apparence > Scroll Down > Disable Hardware Acceleration and Restart Discord.
2. Open Google Chrome > Settings > Advanced > System > Disable Hardware Acceleration.

In order to achieve High FPS and the Best Performance in Escape From Tarkov. It is imperative that you disable Hardware Acceleration from every place and ensure no external feature is squeezing power out of your PC.

Disable Enhance Pointer Precision

This feature acts in a similar way to Hardware Acceleration. But this has a dark side to it. When Enhance Pointer Precision is enabled, the DPI always changes while playing Escape From Tarkov. You will never get better at the game because there is no way you can record that mouse’s muscle memory.

The feature also has a negative impact on your performance because it is always taking a chunk of power to change its speed. Disabling this will not only improve your FPS in Escape from Tarkov. But it’ll also help you become more consistent at the game.

1. Go To Start > Search and Open Mouse Settings.
2. Click on Additional Mouse Options.
3. Afterwards, Proceed to Pointer Options and Uncheck “Enhance Pointer Precision” Under Motion. Don’t forget to hit apply and ok after you make changes.

Adjusting to the new setting won’t be easy. But as you play more and more Escape From Tarkov. The settings will grow on you and you will become twice the player you were.

Conclusion

With that, we end our Escape From Tarkov Best Settings guide. In which we included all the steps that will help your game perform better!